Security specifications

• Cartridge heater to use only in industrial environments.
• Cartridge element with high wattage density in w/cm² which develops high temperatures.
• Serious burns can result if skin comes in contact with parts of the warming system.
• The installations process for a cartridge heater requires expert knows and expert and qualified installer.
• It is necessary to use glasses, safety gloves and clothing for high temperatures.

Installation

• Indicate with symbols warning of hot surfaces.
• Store the most protected from any moisture.
• Cut the total current of the machine our mould.
• Check that the machine or mould is at room temperature.
• Introduction without any anti-grippant paste.
• Exclusively for holes with H7 tolerance.
• Attach regulator and cut systems (thermocouples and regulators).
• Introduce the 100% of the length of the heater.
• Do not place the cable inside the hole.
• Protect the heater cable and entrance connection against shocks, splashes and excess material.
• Neither take nor transport the heater for the tails.
• Keep the tails away from heat sources and protected from it.
• Do not repair damaged tails. Replace them with new ones identical to the originals.
• Indicate and send before accepting the order, in writing, the work conditions (vibration, blows, humid environments…).
• Never stop running without qualified human presence.
• All exposed parts are mandatory for safety people and goods.